PRODUCTS

PRODUCTS

Wireless Mic Systems

ACT-82a Dual Channel Encrypted Digital Diversity Receiver New!

　

　

How to Set-up Interference-free Compatible Systems for ACT-82a?

  • To set up multi-channel operation, the user must select factory preset channels within the same group.

  • A combination of preset channels under different groups can result in possible interference.

  • If one of the preset channels within the same group experiences interference, try to change to another preset channel. If interference-free channels can’t be found, it is highly recommended to change to another group. If interference persists in all groups, changing to another frequency band may be recommended.

  • For example, when setting with 5D band / Group 1 / Channels 1,2,3,4, and Channel 3 experiences interference, you have to change to Channel 5 or another one in Group 1. If any preset channel in Group 1 still experiences interference, you have to change to Group 2 or another group. If interference persists in all groups, you have to change 5D to 6D.

  • In Group 1~10, each group has 24 factory preset interference-free channels. 1 meters minimum safe distance is needed between the transmitters and the receivers for operation. In Group 11~16, each group has 32 factory preset interference-free channels. 3 meters minimum safe distance is needed between the transmitters and the receivers for operation.

  • For less than 24 interference-free channels, MIPRO recommends in setting up channels from Group 1~10 to ensure the optimal performance.

  • If more than 32 interference-free channels need to be used in the same band, but not required for long-distance reception, then setting up channels from Group 11~16 is recommended. Transmitters need to be set in "low power" mode and keep 3 meters minimum safe distance with receivers.

    NOTE：
    The factory preset interference-free channels are designed for MIPRO ACT-82a receivers only.
    Do not mix and use simultaneously with wireless microphone systems from other brands.

　

  • Key Features
  • Specifications
  • Transmitters
  • Accessories
  • Literature

  • Expanded 120MHz bandwidth for increased preset compatible systems.

  • 24-bit audio quality and true digital RF transmission.

  • Proprietary 128-bit encryption guarantees secure audio transmission, preventing unauthorised listening.

  • Second generation DSP technology enhances signal stability and reduces the risk of signal dropouts during interferences.

  • DigitnamicPlus™ technology eliminates compander noise assuring the original sound quality.

  • Built-in SmartEQ™ preset and user-defined microphone capsule equalisation for faithful reproduction to suit artist's preferences.

  • Digital transmission offers better resistance to interference.

  • Digital transmission quality is constant, therefore S/N ratio will not deteriorate as received signal becomes weaker with distance.

  • Proprietary Audio A/D Converter provides a true dynamic range of 115dBA to eliminate saturation or distortion at higher frequencies under high SPL input conditions.

  • Wordclock in/out facility with activity indicator ensures correct synchronisation with other digital equipment.

  • Full-colour VFD (vacuum fluorescent display) can easily be viewed at distance, at any angle and in day/night environments.

  • All controls are intuitive and easily accessible, allowing for quick and easy system setup via a single rotary controller.

  • Features MIPRO’s patented industry standard AutoScan and ACT (Automatic Channel Targeting) technology for easy, fast channel setup.

  • Receiver provides bias voltage for MIPRO antenna booster systems.

  • Optional MIPRO RCS2.Net software allows real-time network adjustments and monitoring of multiple, large scale systems.

  • Ideal for studio, stage and music performances as well as military, courtroom, conference, boardroom and broadcast applications ~ anywhere audio security and accurate, distortion-free reproduction of the full sound spectrum are required.

► Overall System

Frequency Range

UHF 482~602MHz (US & EU) / UHF 638~758MHz (EU)

Bandwidth

120MHz

Channel Set-up

Scan & ACT sync

Audio Sampling

24-bit/44.1KHz Rate

Audio Frequency Response

20Hz~20KHz (-2dB)

Encryption

128bit

Audio Compression

2nd Generation DSP inertial coding

Latency

<2.9ms

S/N Ratio (analog output)

>115dB(A)

T.H.D.

<0.04% @ 1KHz

► Receiver

Channel

Dual

Chassis

EIA Standard 19" 1U, Metal

Sensitivity

12dBμV at S/N≒118dBA (D)

Bandwidth

120MHz

Channel Grid

25KHz

Image & Spurious Rejection

>85dB

Receiving Mode

Digital Diversity

IF System

New IF

Audio Output

Balanced XLR Analog Audio Output: Switchable 10dB / 0dB / -6dB / -12dB

Digital Audio Interface

XLR Connector, AES/EBU Interface, Stereo(CH1+CH2)

Wordclock Input / Output

BNC Female × 2, 32KHz~96KHz

Digital Equalizer

Preset Microphone Capsule Modeling

PC Interface

USB or RS-232 interface. Proprietary MIPRO ACT-BUS

Display

Full-color VFD

Antenna Input

50Ω TNC Female Connector ×2

Power Supply

Built-in 100-240V AC Switching Power Supply

Dimensions

420(W) × 44(H) × 245(D) mm / 16.5(W) × 1.7(H) × 9.6(D)"

Weight

Approx. 2.7kg / 6.0lbs

Environment Conditions

-10~+60℃

Matching Transmitters

ACT-8Ha, ACT-8Ta

Note

Refer to actual product in the event of product discrepancy.

Frequency range and maximum deviation comply with the regulations of different countries.

　 　 　 　 　 　 　 　 　

ACT-8Ha

 　

ACT-8Ta

 　 　 　 　 　 　 　 　

　 　 　 　 　

ACT-8D

 　

FB-72

 　

FBC-71

 　

AT-70

 　

AT-70B

 　

AT-90W
　 　 　 　 　 　 　 　 　 　

AD-707a

 　 　 　 　 　 　 　 　 　 　

Coming soon