PRODUCTS

PRODUCTS

Antenna Systems

MP-10 Booster Relay Power Supply

　

　

　

Key Features

  • MP-10 can independently provide power to external/internal antenna booster. This allows complicated external antenna dividing systems to work efficient independently so that longer antenna cable can connect with more boosters and compromise the signal loss due to long connecting cables.

  • Aluminum casing has superb heat ventilation character and provides constant output voltage at 8 volt DC.

  • Wide coverage bandwidth and low input loss : <1dB@0.1~1GHz，0.6dB@810MHz type.

  • RF output is fully isolated from DC power. Ground circuit for high frequency RF prevents ground loop noise.

Specifications

Input Power

10~16VDC

Regulated Output Power

8V DC / 1A

Attenuation

100 MHz~1000 MHz <1dB

Impedance

50Ω

Ground Isolation

RF output, DC ground isolation

Connector

TNC×2, 2.0mm DC×1

Dimensions

90.3(W)×25(H)x55.4(D)mm / 3.5(W)x1(H)x2.2(D)"

Weight

100g / 3.5oz

Note

Refer to actual product in the event of product discrepancy.